Excellent Energy Efficiencyair Cooled Chiller

Certification: ISO HS Code: 8418612090 Origin: China The EKAC series low-temperature high-efficiency total heat-recovery unit features leading-edge total heat recovery technologies and state-ofthe-art EVI enthalpy increase technologies. It can provide effective heating in temperatures as low as -20° C to provide "free" hot water of 45-60° C around the clock.
Compared with traditional air-cooled heat-pump unit + hot water equipment, units of this series can reduce operation cost by more than 60%. The unit combines energy efficiency, comfort, flexibility, reliability, and intelligence, and can be used to replace traditional centralized heating equipment to provide hot water without extra cost.
The unit helps saving energy and reducing green house gas emission, and brings substantial benefit to customers while protecting the environment.

Model No.			EKAC210BRLHR	EKAC42BRLHR	EKAC360BRLHR	EKAC840BRLHR	EKAC1050BRLHR	EKAC1260BRLHR
Air conditioning mode	Nominal cooling capacity	kw	63	126	189	252	315	378
	Nominal heating capacity	kw	63	126	189	252	315	378
	Total power of nominal cooling capacity	kw	19	38	57	76	95	114
	Total power of nominal heating capacity	kw	19	38	57	76	95	114
	Water flow rate for nominal cooling capacity	kw	19	38	57	76	95	114
	Water flow rate for nominal heating capacity	kw	19	38	57	76	95	114
Hot water mode	Nominal water flow	kw	68	136	204	272	340	408
	Nominal heating capacity	kw	68	136	204	272	340	408
	Total power of nominal heating capacity	kw	19.8	39.6	59.4	79.2	99	118.8
Cooling + heat recovery mode	Nominal cooling capacity	kw	63	126	189	252	315	378
	Nominal heat recovery capacity	kw	63	126	189	252	315	378
	Total nominal power	kw	19	38	57	76	95	114
	Nominal water supply capacity at heat recovery side	kw	19	38	57	76	95	114
	Nominal water flow at evaporator side	kw	19	38	57	76	95	114
Power supply		v/ph/hz	380/3/50
Flow control			Electronic expansion valve
Refrigerant			R22
Heat  exchanger type	Air conditioning side	m³/h	braze-welded panel-type heat exchanger
	hot water side	m³/h	High-efficiency bucket heat exchanger
Compressor	Qty	Set	2	4	6	8	10	12
Fan	Qty	Set	2	4	6	8	10	12
Water resistance	Air conditioning side	kPa	45	45	45	45	45	45
	hot water side	kPa	65	65	65	70	70	70
Minimum diameter for water pipes	Air conditioning side	inch	≥2	≥2-1/2	≥3	≥4	≥4	≥5
	hot water side	inch	≥2-1/2	≥3	≥4	≥4	≥5	≥5
Dimensions	L×H	mm	2012×1840
	Width	mm	880	2125	3370	4615	5860	7105
Power cable specification	Section area of live line	mm²	≥10	≥35	≥70	≥95	≥120	≥150
	Qty.of live lines		3
	Section area of null line	mm²	≥4
	Qty.of live lines		1
	Section area of grounding line	mm²	≥10	≥16	≥35	≥50	≥60	≥75
	Qty.of grounding lines		1
Net weight		kg	610	1220	1830	2440	3050	3660
Operation weight		kg	630	1260	1890	2520	3150	3780
Note: 1. Air conditioning mode: Test conditions for nominal cooling capacity: outlet water temperature 7°C; water flow: 0.172 m3/(h@kW); outdoor ambient temperature 35°C. Test conditions for nominal heating capacity: outlet water temperature: 45°C; water flow: 0.172m3/(h@kW); temperature of outdoor dry/wet bulb: 7°C/6°C. 2. Cooling + Heat recovery mode Test conditions for nominal cooling capacity: Hot water side: Outlet water temp. 45°C; nominal water flow for hot water mode. Air conditioning side: Outlet water temp. 7°C; nominal water flow for heating mode. 3. Hot water mode: Test conditions for nominal water flow: temperature of outdoor dry/wet bulb: 20/15°C; Temperature of inlet/outlet water: 50/55°C. 4. Water resistance at the Air Conditioner side includes water pressure drop of the unit and the attached Y-shaped filter. 5. Water resistance at the hot water side includes water pressure drop of the unit and does not include the pressure drop at the Y-shaped filter and other components. 6. Pipes outside the unit need to be customized and installed on site. The diameter of the pipes must meet design requirements. EK does not provide the pipes. 7. Full heat recovery units and other units can be combined to form partial heat recovery modular system. Full heat recovery units can also be combined to form a total heat recovery system. Modular units can be formed using the 1~16 basic modules. The above table lists the parameters for common module combinations.

Contact us if you need more details on Air Cooled Chiller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Chiller、Low Temperature. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Chiller