Air Cooled Heat Pump for Heating/Cooling

Model NO.: EKAC460BRSR Usage: Room China Energy Efficiency Standard: Level 3 Power Source: Electrical Trademark: tili Origin: Guangdong Province Type: Central Air Conditioners Certification: CCC Cooling/Heating: Heating/Cooling + Hot Water Condition: New Transport Package: Standard Exporting Package HS Code: 8418619000 1) Saving energy:COP up to 8.32
2) Operating range : -10 to 48 degree
3) Noise level low to 54dB(A)
4) Smart control based on module combination
5) High efficiency H.E.
6) Air Cooled absorption chiller with Heat Recovery


 


i) Installation:




ii) Electrical diagram

Model No.			EKAC230BRSR	EKAC460BRSR	EKAC690BRSR	EKAC920BRSR	EKAC1150BRSR	EKAC1380BRSR
Air conditioning mode	Nominal cooling capacity	kw	65.5	131	196.5	262	327.5	393
	Nominal heating capacity	kw	69	138	207	276	345	414
	Nominal cooling input power	kw	19.4	38.8	58.2	77.6	97	116.4
	Nominal heating input power	kw	19.2	38.5	57.7	76.9	96.2	115.4
	Water flow rate for nominal cooling capacity	m3/h	11.3	22.5	33.8	45.1	56.3	67.6
	Water flow rate for nominal heating capacity	m3/h	11.9	23.7	35.6	47.5	59.3	71.2
Hot water mode	Nominal water supply capacity	kw	16.3	32.7	49	65.4	81.7	98
	Nominal heating capacity	kw	76	152	228	304	380	456
	Total power of nominal heating capacity	kw	18.4	36.7	55.1	73.5	91.8	110.2
Cooling + heat recovery mode	Nominal cooling capacity	kw	59.7	119.4	179.1	238.8	298.5	358.2
	Nominal heat recovery capacity	kw	76	152	228	304	380	456
	Nominal input power	kw	16.3	32.6	48.9	65.2	81.5	97.8
	Nominal water supply capacity at heat recovery side	m3/h	16.3	32.6	48.9	65.2	81.5	97.8
	Nominal water flow at evaporator side	m3/h	10.3	20.5	30.8	41.1	51.3	61.6
Power supply		v/ph/hz	380/3/50
Flow control			Electronic expansion valve
Refrigerant			R22
Heat  exchanger type	Air conditioning side	m³/h	braze-welded panel-type heat exchanger
	hot water side	m³/h	High-efficiency bucket heat exchanger
Compressor	Qty	Set	2	4	6	8	10	12
Fan	Qty	Set	2	4	6	8	10	12
Water resistance	Air conditioning side	kPa	45	45	45	45	45	45
	hot water side	kPa	75	75	75	75	75	75
Minimum diameter for water pipes	Air conditioning side	inch	≥2	≥3	≥3	≥4	≥4	≥5
	hot water side	inch	≥2	≥3	≥4	≥4	≥5	≥5
Dimensions	L×H	mm	2012×1840
	Width	mm	880	2125	3370	4615	5860	7105
Power cable specification	Section area of live line	mm²	≥10	≥35	≥70	≥95	≥120	≥150
	Qty.of live lines		3
	Section area of null line	mm²	≥4
	Qty.of live lines		1
	Section area of grounding line	mm²	≥10	≥16	≥35	≥50	≥60	≥75
	Qty.of grounding lines		1
Net weight		kg	600	1200	1800	2400	3000	3600
Operation weight		kg	620	1240	1860	2480	3100	3720
Note: 1. Air conditioning mode: Test conditions for nominal cooling capacity: outlet water temperature 7°C; water flow: 0.172 m3/(h@kW); outdoor ambient temperature 35°C. Test conditions for nominal heating capacity: outlet water temperature: 45°C; water flow: 0.172 m3/(h@kW); temperature of outdoor dry/wet bulb: 7°C/6°C. 2. Cooling + Heat recovery mode Test conditions for nominal cooling capacity: Hot water side: temperature of outlet water 45°C, water flow 0.215 m3/(h@kW); Air conditioning side: temperature of outlet water 7°C, water flow 0.172 m3/(h@kW); 3. Hot water mode: Test conditions for nominal water flow: Ambient temp: 20/15°C; outlet water temp: 45°C; water flow of cooling + heat recovery mode. 4. Water resistance at the Air Conditioner side includes water pressure drop of the unit and the attached Y-shaped filter. 5. Water resistance at the hot water side includes water pressure drop of the unit and does not include the pressure drop at the Y-shaped filter and other components. 6. Pipes outside the unit need to be customized and installed on site. The diameter of the pipes must meet design requirements. TILI does not provide the pipes. 7. Full heat recovery units and other units can be combined to form partial heat recovery modular system. Full heat recovery units can also be combined to form a total heat recovery system. Modular units can be formed using the 1~16 basic modules. The above table lists the parameters for common module combinations. 8. For on-site electric wiring, see the name plate or installation menu of the unit.

Contact us if you need more details on Air Cooled Heat Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about for Heating/Cooling、Heat Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Heat Pump Air Conditioner